Webgui Control Page; Power On/Off - CYP CPLUS-V4H2HP Operation Manual

6g uhd 4 to 2 hdmi matrix with hdcp2.2

Hide thumbs Also See for CPLUS-V4H2HP:

Table of Contents

Once you are satisfied with the network settings, you may use

them to connect via telnet or WebGUI. The network information

window provides a convenient link to launch the WebGUI directly.

6.3.1 WebGUI Control Page

All functions, including power, input selection, EDID management,

HDCP management, output adjustments, Ethernet settings, volume

adjustments, and reset/firmware functions, are presented on a single

web page to allow for intuitive operation. The individual functions will

be introduced in the following sections.

The unit can be powered on or off (stand-by mode) from this tab.

Table of Contents

Do you have a question about the CPLUS-V4H2HP and is the answer not in the manual?