Naming; Network Setting - CYP CPLUS-V4H2HP Operation Manual

6g uhd 4 to 2 hdmi matrix with hdcp2.2

Hide thumbs Also See for CPLUS-V4H2HP:

Table of Contents

6.3.10 NAMING

This tab allows for the renaming of the four HDMI input ports and

the HDMI output ports. Please click the "SAVE" button to store the

changes.

This tab provides control over the unit's network settings. The IP mode

can be set to DHCP for automatic IP configuration, if your local

network supports it, or it can be placed in Static mode and the IP

address, netmask and gateway can be defined manually. The HTTP

and telnet ports can also be changed from their defaults here.

Table of Contents

Do you have a question about the CPLUS-V4H2HP and is the answer not in the manual?