Lexmark XM3150 User Manual page 167

Understanding the printer menus
Use
Screen Brightness
20–100
One Page Copy
Off
On
Audio Feedback
Button Feedback
On
Off
Volume
1–10
Show Bookmarks
Yes
No
Allow Background Removal
On
Off
Allow Custom Job Scans
On
Off
Scanner Jam Recovery
Job Level
Page Level
Web Page Refresh Rate
30–300
Contact Name
Location
Alarms
Alarm Control
Cartridge Alarm
Stapler Alarm
To
Specify the brightness of the display.
Note: 100 is the factory default setting.
Set copies from the scanner glass to only one page at a time.
Note: Off is the factory default setting.
Specify the audio volume for the buttons.
Notes:
•
On is the factory default setting for Button Feedback.
•
5 is the factory default setting for Volume.
Specify whether bookmarks are displayed from the Held Jobs area.
Note: Yes is the factory default setting.
Specify whether image background removal is allowed.
Note: On is the factory default setting.
Scan multiple jobs to one file.
Note: On is the factory default setting. If On is selected, then
Allow Custom Job Scans can be enabled for specific jobs.
Specify how a scanned job should be reloaded if a paper jam occurs
in the ADF.
Note: Job Level is the factory default setting.
Specify the number of seconds between Embedded Web Server
refreshes.
Note: 120 is the factory default setting.
Specify a contact name.
Note: The contact name is stored on the Embedded Web Server.
Specify the location.
Note: The location is stored on the Embedded Web Server.
Set an alarm when the printer requires user intervention.
For each alarm type, select from the following options:
Off
Single
Continuous
Notes:
• Single is the factory default setting for Alarm Control. This
sounds three quick beeps.
• Off is the factory default setting for Cartridge Alarm and
Stapler Alarm.
•
Continuous repeats three beeps every 10 seconds.
167