Installing A Memory Card - Lexmark XM3150 User Manual

Additional printer setup
1 Memory card connector
2 Option card connector
3 Printer hard disk connector
4 Lexmark Internal Solutions Port connector
4
Close the shield, and then the access door.

Installing a memory card

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.
Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity.
Touch something metal on the printer before touching any controller board electronic components or connectors.
Note: An optional memory card can be purchased separately and attached to the controller board.
1
Access the controller board.
For more information, see
2
Unpack the memory card.
Warning—Potential Damage: Do not touch the connection points along the edge of the card. Doing so may
cause damage.
3
4
1
"Accessing the controller board" on page
2
1
2
28.
29