Speakers - HP ENVY Maintenance And Service Manual

Speakers

Description
Speaker Kit (includes left and right speakers and cables)
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the speakers:
1. Disconnect the speaker cable (1) from the system board.
2. Release the speaker cables from the retention clips (2) and channels built into the keyboard/top cover.
3. Remove the speakers (3) and cables.
Reverse this procedure to install the speakers.
Bottom cover on page
Battery on page 28).
26).
Component replacement procedures
Spare part number
829309-001
33