HP ENVY Maintenance And Service Manual page 57

2. Remove the two Phillips PM2.5×2.9 broad head screws (2) that secure the display assembly to
the keyboard/top cover.
3. Swing the display hinges (1) up and back as far as they will go.
4. Slide the keyboard/top cover (2) away from the display assembly.
5. If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a. Remove the two display bezel screw covers (1).
The display bezel screw covers are available using spare part numbers 848174-001 (for use only
on computers with model numbers 13-d100 through 13-d199) and 833481-001 (for use only on
computers with model numbers 13-d000 through 13-d099).
Component replacement procedures 47