5.
Disconnect the WLAN antenna cables (3) from the WLAN module terminals.
NOTE:
WLAN antenna cable labeled "2/AUX" connects to the WLAN module "Aux" terminal.
6.
Remove the WLAN module (4).
NOTE:
If the WLAN antennas are not connected to the WLAN module, the protective sleeve should be
installed on the antenna connectors, as shown in the following illustration.
Reverse this procedure to install the WLAN module.
32
Chapter 5 Removal and replacement procedures
The WLAN antenna cable labeled "1/MAIN" connects to the WLAN module "Main" terminal. The