Position Of The Boiler - DeDietrich GT 330 Technical Instructions

The dimensions (in mm) correspond to the minimum recommended
dimensions needed to ensure adequate accessibility around the
boiler.
Size A
Standard panel
B
DIEMATIC-m3
Pay attention to the overall volume of the burner when the
door is open. To install several boilers in cascade, these
dimensions should be adapted accordingly.
Warning:
In order to avoid damage to the boilers, it is necessary to prevent the
contamination of combustion air by chlorine and/or fluoride
compounds, which are particularly corrosive.
These compounds are present, for example, in aerosol sprays,
paints, solvents, cleaning products, washing products, detergents,
glues, snow clearing salts, etc.
Therefore:
• Do not suck in air evacuated from premises using such
products: hairdressing salons, dry cleaners, industrial premises
(solvents), premises containing refrigeration systems (risk of
refrigerant leakage), etc.
12
Boiler
mm
mm
Panel K3
B3 mm

Position of the boiler

Ventilation: To allow the input of combustive air, sufficient ventilation
must be provided in the boiler room, for which the cross section and
emplacement must satisfy regulations in force in the country in which
the boiler is installed.
GT 334 GT 335
840 1000
105 105
195 195
• Do not stock such products close to the boilers.
If the boiler and/or peripheral equipment are corroded by such
chloride or fluoride compounds, the contractual guarantee
cannot be applied.
GT 330
GT 336 GT 337 GT 338
1160 1320
105 105
195 195
10/04/06 - 300007650-001-A
GT 339
1480 1640
105 105
195 195