Hapter; Device Drivers For The M - VeriFone MX800 series Programmer's Manual

Device Drivers
Device Drivers
x
for the M 800
series of
Terminals
The following device drivers are supported by M
Ethernet Port
Real Time Clock
4 Serial Ports
USB
Display
Sound
Magnetic Stripe Reader
IPP
Delta
Touch panel
Details on the standard Linux drivers are available from the open source
community. The succeeding sections will detail the VeriFone specific drivers.
x
800 series of terminals:
Standard Linux support as /dev/eth0
Standard Linux support as /dev/rtc
Standard Linux support as /dev/ttySAC0, ttySAC1,
ttySAC2
Requires Serial Port handshake enhancement
Note:
COM3 will be supported by the Wrenchman
module, device name /dev/ttyWR0
COM1 = /dev/ttySAC0
•
COM2 = /dev/ttySAC1
•
COM3 = /dev/ttyWR0
•
COM4 = /dev/ttySAC2
•
Standard Linux support as /proc/bus/usb
USB device serial port is defined as:
COM5 = /dev/ttygser
Standard Linux support as /dev/fb0
Standard Linux support as /dev/dsp
VeriFone unique device /dev/msr
VeriFone unique device /dev/ipp
VeriFone unique device /dev/delta
Standard Linux /dev/input/mice
M
C

HAPTER

X
800 S P
ERIES ROGRAMMERS
4
33
G
UIDE