Table of Contents
Advertisement
Heat sink
Description
Heat sink (includes grounding tape and replacement thermal material) for use on all computer models
Before removing the heat sink, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
5.
Remove the system board (see
Remove the heat sink:
1.
Detach the two pieces of ground tape (1) that secure the heat sink to the system board.
2.
Remove the two Phillips PM1.9×1.9 screws (2) that secure the heat sink to the system board.
Keyboard/top cover on page
System board on page
35).
Spare part number
787711-001
25).
Component replacement procedures
37
Advertisement
Table of Contents
