Table of Contents
Advertisement
11.
If it is necessary to replace the webcam/microphone module:
a.
Remove the display bezel.
b.
Detach the webcam/microphone module (1) from the display enclosure. (The webcam/
microphone module is attached to the display enclosure with double-sided adhesive at
two locations.)
c.
Disconnect the webcam/microphone module cable (2) from the webcam/microphone module.
d.
Remove the webcam/microphone module.
The webcam/microphone module is available using spare part number 787736-001 for use on all
computer models.
12.
If it is necessary to replace the display panel:
Component replacement procedures
45
Advertisement
Table of Contents
