Table of Contents
Advertisement
Battery
Description
Battery, 3-cell, 37-WHr, 2.96-AHr, Li-ion for use on all computer models (includes cable)
Before removing the battery, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Remove the battery:
1.
Remove the eight Phillips PM1.9×2.8 screws (1) that secure the battery to the base enclosure.
2.
Detach the connector board cable (2) from the battery. (The connector board cable is attached to the
battery with double-sided adhesive.)
3.
Lift the front edge of the battery (3) until it rests at an angle.
4.
Remove the battery (4) by sliding it up and forward at an angle.
Reverse this procedure to install the battery.
32
Chapter 5 Removal and replacement procedures
Keyboard/top cover on page
Spare part number
774159-001
25).
Advertisement
Table of Contents
