HP Chromebook 14-X0 SERIES Maintenance And Service Manual page 52

a. Remove the display bezel.
b. Remove the four Phillips PM2.0×2.2 broad head screws (1) that secure the display panel to the
display enclosure.
CAUTION:
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to
the display panel.
c. Lift the top edge of the display panel (2) and swing it up and forward until it rests upside down in
front of the display enclosure.
d. Release the adhesive strip (1) that secures the display panel cable connector to the display panel.
e. Disconnect the display panel cable (2) from the display panel.
f. Remove the display panel (3).
The non-TouchScreen display assembly display panel is available using the following spare part
numbers:
●
●
●
●
●
●
46 Chapter 5 Removal and replacement procedures
Before turning the display panel upside down, make sure the work surface is clear of
787719-001–For use on computer models in ocean turquoise finish for use only on HP
Chromebook 14 PC
787717-001–For use on computer models in ocean turquoise finish for use only on HP
Chromebook 14 PC
787720-001–For use on computer models in ocean turquoise finish for use only on HP
Chromebook 14 PC
787718-001–For use on computer models in ocean turquoise finish for use only on HP
Chromebook 14 PC
788508-001–For use on TouchScreen computer models in Jack black finish for use only on
HP Chromebook 14 G3
788509-001–For use on non-TouchScreen computer models in Jack black finish for use on
HP Chromebook 14 PC, and for use on HP Chromebook 14 G3