Palm PMG0501000P User Manual page 97

4 Enter the email address you use to
access email from your corporate
Exchange server. Check the box to have
the setup process get your Exchange
server settings from the Internet.
5 Press Next (right softkey).
6 Enter the username and password you
use to access your corporate mail
server, and enter the Exchange server
domain.
You can't see your password as you
NOTE
enter it, so be careful. Be sure Caps Lock
and Option Lock are not on unless you
need them. For info on how to enter
characters, see Entering lowercase and
uppercase letters and Entering numbers,
punctuation, and symbols.
S Y N C H R O N I Z I N G I N F O R M A T I O N
The Exchange server settings are case-
TIP
sensitive. Be sure to enter uppercase and
lowercase letters properly.
7 Check the Save password box.
If you found out from your system
TIP
administrator that it is not OK to store your
corporate email password on your
smartphone, don't check the Save password
box; you must synchronize manually (see
Initiating a wireless sync manually).
8 Press Next (right softkey).
9 If prompted, enter the server address.
Check the This server requires an
encrypted (SSL) connection box if
your server uses an encrypted
connection.
S E T T I N G U P W I R E L E S S S Y N C H R O N I Z A T I O N
5
97