Palm PMG0501000P User Manual page 20

2
S E T T I N G U P
2 If the battery is installed, remove it.
Slide your finger under the top of the
battery (nearest the camera lens) and lift
up.
3 Hold the SIM card with its metal
contacts facedown and its notch aligned
with the notch of the cutout in the
compartment, and slide the SIM card
into the cutout.
1
2
1 Card notch
2 Compartment notch
20
I N S E R T I N G T H E S I M C A R D A N D B A T T E R Y
4 Align the metal contacts on the battery
with the contacts of the battery
compartment, and then press the
battery into place.
1
2
1 Battery contacts
2 Smartphone contacts
5 Slide the back panel back into place.
Your smartphone screen turns on. It
takes a few minutes for your
smartphone to prepare for setup—you'll
see the Palm ® logo and a blank