Palm PMG0501000P User Manual page 179

information. The availability of these
options varies based on your
Authentication and Data Encryption
settings.
4 Enter the following settings and press
Finish (right softkey):
Use IEEE 802.1x network access
control: Lets you set these parameters
if required by the network.
EAP type: Specifies the Extensible
Authentication Protocol type.
5 Press OK .
Y O U R C O N N E C T I O N S T O T H E W E B A N D W I R E L E S S D E V I C E S
Disconnecting from a network
To disconnect from a Wi-Fi network, do
one of the following:
To save any settings you entered, so
•
that your smartphone automatically
connects to this network the next time
you are within range and the Wi-Fi
feature is turned on, press and hold
Wi-Fi
To remove the network settings from
•
memory, so that your smartphone does
not automatically connect to this
network the next time you are within
range and the Wi-Fi feature is turned on,
press Menu (right softkey) and select
Remove Settings.
Customizing Wi-Fi settings
1 Press Start
2 Select the Connections tab, and then
select Wi-Fi Prefs
Advanced tabs show the status of the
Wi-Fi feature and display information
about an active Wi-Fi connection.
to turn off the Wi-Fi feature.
and select Settings.
. The Main and
C O N N E C T I N G T O A W I - F I N E T W O R K
8
179