Installation Method - Sinclair KJR-120G User Manual

3. INSTALLATION METHOD

1.Wired remote controller structure size figure
123mm
2.Remove the upper part of wire controller
Insert a slot screwdriver into the slots in the lower
part of the wire controller (2 places), and remove
the upper part of the wire controller. (Fig.3-2)
NOTICE
The PCB is mounted in the upper part of the wire
controller. Be careful not to damage the board
with the slot screwdriver.
4
120mm 18.5mm
Fig 3-1
4 6 mm
83.5mm
62mm
Slots
Fig 3-2