Sinclair KJR-120G User Manual page 12

3. INSTALLATION METHOD
NOTE: DO NOT allow water to enter the remote control.
Use the trap and putty to seal the wires.
Putty
6. Reattach the upper part of the wire controller
After adjusting the upper case and then buckle the upper case; avoid clamping the
wiring during installation. ( Fig 3-7 )
Fig 3-7
8
Trap
Fig 3-6
Putty
Putty
Trap
Trap
All the pictures in this manual are for
explanation purpose only.
Your wire controller may be slightly
different .The actual shape shall prevail.