System Configuration
Connection
When the camera is connected to a computer and joystick keyboard via Extension Module with a VISCA cable (cross
type, RS-232), you can operate the camera with the computer and the joystick keyboard.
When the camera is connected to a joystick keyboard via Extension Module with a control cable (cross type, RS-
422/485), you can operate the camera's pan, tilt, zoom with the joystick keyboard.
In this connection configuration, Extension Module, DVI-HDMI converter, DVI cable, HDMI cable, Analog video
cable, data cable is required. To obtain these third party components or accessories, consult the dealer where you
bought your camera.
Notes
Use only the AC power adaptor (JEITA type4) supplied with the unit.
Do not use any other AC power adaptor.
Polarity of the plug
You have to set the video format of the signal to output from the camera.
For detailed information on how to set the video format, see "SYSTEM SELECT
switch" on page 17, 21.
9