Table of Contents
Advertisement
Operation Using the Infrared Remote Controller
Pan/Tilt and Zoom Operation
Panning and Tilting
1. Press the POWER switch.
The camera will turn on and perform the pan/tilt reset operation automatically.
2. Press the arrow button to pan or tilt the camera.
While checking the picture on the screen, press the desired arrow button.
To move the camera in short increments, press the button just for a moment.
To move the camera in long increments, press and hold the button.
To move the camera diagonally, press the "←, →" button while
holding down the "↑, ↓" button.
Restore to starting position
Press the HOME button.
If the camera moves in a different direction from the one you intended
The camera is preset so that the image output from the camera is rotated toward the right whenever you press the
"←, →" button.
To face the camera toward the opposite direction
You might wish to face the camera toward the opposite direction from that of the button you pressed, for example,
when you change the direction of the camera while checking the picture on the screen. In such a case, press the 2
(REV) button while holding down the L/R DIRECTION SET button.
Arrow button
Movement of the
camera
To reset the setting
To reset the setting, press the 1 (STD) button while holding down the L/R DIRECTION SET button.
Arrow button
Movement of the
Note
The above setting only changes the signal emitted from the infrared remote controller, and does not change the
setting of the camera itself. Therefore, repeat the setting for each infrared remote controller if you are using more
than one infrared remote controller.
When the STANDBY lamp is blinking
If the camera is moved forcibly, or a finger or other object interferes with camera movement, the camera may fail to
memorize the pan/tilt position.
Press the PAN-TILT RESET button to reset the pan/tilt position.
Setting
While holding
down
Press
camera
While holding
down
Setting
Press
23
Hide quick links:
Advertisement
Table of Contents
