Table of Contents
Advertisement
PICTURE Menu
The PICTURE menu is used to set the items related to the picture.
SHARPNESS:
Picture sharpness value ranges from 0 to 20. You can enjoy emphasized
edge and high-resolution images.
EFFECT: (Picture Effect)
It consists of the following functions:
Neg. Art: Negative/Positive Reversal
Black & White: Monochrome Image
Image effect from Off, B&W, NEG.ART
NOISE REDUCTION:
Noise reduction - you can enjoy clearer images by removing unnecessary noise. You can select 4 levels from OFF
(MIN), 1 to 3 (MAX).
FLIP:
Image E-Flipper – Used when ceiling mounting or upright mounting. Set to OFF is upright mode, set to ON is for
ceiling mount.
DE-FLICKER:
You can turn it ON if the Video output format frame rate is difference from your country's electricity Frequency.
GAMMA:
In this mode, the gamma can be set to value from 0 to 4.
WDR: (Wide dynamic range mode): WDR feature is available on certain product
models.
Wide Dynamic: ON, OFF. The camera distinguishes light and dark areas within the same scene, adjusts the
brightness for dark areas, and also controls the blown out highlights.
You can select the wide dynamic range mode between ON and OFF
BLC (Back Light Compensation)
When the background of the subject is too bright, or when the subject is too dark due to shooting in the AE mode,
back light compensation will make the subject appear clearer.
This is set to ON, OFF
PAN / TILT / ZOOM Menu
The PAN TILT ZOOM menu is used to select the pan/tilt/ zoom mode.
DIGITAL ZOOM:
Set to DIGITAL ZOOM ON, 12X digital zoom is activated.
You can set digital zoom to ON or OFF. When set to OFF, digital zoom does
not operate, and only optical zoom is available. When set to ON, digital zoom
takes over after optical zoom reaches MAX (10×). Up to 120× can be
zoomed digitally.
When digital zoom is available, the resolution decreases
ZOOM SPEED:
Set Zoom Speed value to from 1 to 8 (The speed from low to high), to change the speed of SLOW ZOOM on
remote controller.
ZOOM RATIO OSD (Zoom times display):
Set Ratio OSD to ON, the number of the zoom times that you are operating displays on screen.
ADAPTIVE PT:
Set to ON, Pan Tilt speed would be adaptive with the zoom range
SYSTEM Menu
IR-RECEIVE (Infrared Signal Reception)
When this is set to OFF, the camera does not receive the signal from the
infrared remote controller.
Be sure to keep it set to ON when you use the infrared remote controller.
Note
You cannot set IR-RECEIVE to OFF when you operate the menu using the infrared remote controller. To set it to
OFF, use the appropriate VISCA controller.
21
Hide quick links:
Advertisement
Table of Contents
