Table of Contents
Advertisement
DISPLAY INFO
When this item is set to ON, the message of the camera configuration appears for about 3 seconds on the screen,
after the camera is powered on or rebooted.
FACTORY RESET
You can select this item to set camera back to Factory Default setting by pressing HOME button to confirm the
action. All data of the camera that have been set will be deleted.
RELOAD PRESET 1:
When this item is set to ON, preset 1 is set to Home position. The camera goes to Home position when it is
powered on or reset.
VIDEO FORMAT:
You can change the video format by adjusting this item. Select the item, press "←" button to choose the video
format you want to set to, then press "→" (Pressing "→" button changes value on some product models) or HOME
button to confirm it. After you confirm your choice, press HOME button again to restore it. The camera will reboot by
itself. The new video format is activated.
You can cancel it by pressing the DATA SCREEN button.
Depending on the video client software you are using, some video software may need to be restarted to obtain the
new video format.
The video formats that you can select from are: 720P50, 1080P25, 1080P60, 720P60, 1080P30, 1080P50.
PELCO ID:
You can set camera address for RS422/485 control.
Note
The camera video format can be changed by setting bottom DIP switch as well. For details, see page 17.
22
Hide quick links:
Advertisement
Table of Contents
