Obtain Video Signal; Obtain Audio Signal - Marshall Electronics CV610-U3 User Manual

Obtain Video Signal

USB3.0 Video Signal
1. Install video client software on the computer that you want to use
the camera on.
2. Use the USB3.0 cable to connect the camera to the computer.
Connect the power adapter to the camera and the power outlet.
3. Power on the camera, wait for a while, the camera will be
recognized and installed automatically by the computer. USB3.0
driver is not required for the camera.
4. Open the video client software (Here, we use VLC Media Player
for example), under "Media", select "Capture Device". Under
Video device name, "USB3.0 Video Camera" will be listed.
Under the Audio device name, "Digital Audio Interface (2-
USB3.0 Video Camera)" will be listed. Select both devices to
use.
5. Check the box "show more options", Select Caching to 500ms.
6. Interface of the setting page and terminology of the setting items
may vary according to the video client software you are using.
7. Click "Play" or "Apply" the selections and the video will be
displayed on the screen.
HDMI / DVI Video Signal
The camera can simultaneously stream HDMI video output with USB3.0 video output. The DVI port on the rear
panel is not for DVI video output but it is a composite port for multiple use. In order to use HDMI video output, you
need to use the Extension Module (sold separately).
1. Connect the Extension Module to the camera composite port when the power is off. Turn on the camera
power, after the camera initializes, HDMI video signal can be activated automatically.
2. Connect HDMI cable in between the Extension Module and your HDMI display.
3. You now have HDMI video output.
4. You can use HDMI to DVI converter to obtain DVI video signal.
CVBS Video signal
The situation is same as DVI video signal. Use Extension Module and analog video cable to obtain CVBS video
signal. AV cable is needed.

Obtain Audio Signal

1. The camera has built in Mic. It generates audio signal to the video
client software. In the software Audio section find Microphone setting.
"Digital Audio Interface (USB3.0 Video Camera)" will be listed. Once
you select it as software audio device, you can use the built-in Mic
for communicating.
2. You can have external audio input by using Extension Module
(optional). The built-in Mic will be deactivated after the external audio
input is used.
10