1. Manuals
  2. Brands
  3. Marshall Electronics Manuals
  4. IP Camera
  5. VS-7300
  6. User manual

Marshall Electronics VS-7300 User Manual

5.0 mp ip box camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
VS-7300
5.0 MP IP Box Camera
User Manual
Firmware Version v1.0
Copyright ©2016, Marshall Electronics, Inc.
All Rights Reserved. This document may not be copied.

Advertisement

Table of Contents
loading

Related Manuals for Marshall Electronics VS-7300

Summary of Contents for Marshall Electronics VS-7300

  • Page 1 VS-7300 5.0 MP IP Box Camera User Manual Firmware Version v1.0 Copyright ©2016, Marshall Electronics, Inc. All Rights Reserved. This document may not be copied.
  • Page 2 Product options and specifications can be changed without notice. The information in this manual is furnished for informational use only and should not be construed as a commitment by Marshall Electronics, Inc. Marshall Electronics, Inc. assumes no responsibility or liability for any errors or inaccuracies that may appear in this publication. Safety Precaution We appreciate your IP camera purchase.

  • Page 3: Table Of Contents

    1. Introduction .......................... 4 1.1 About this Manual ......................4 1.2 Features ........................4 1.3 Product and Accessories ....................5 1.4 System Connections ..................... 6 2. Installation ..........................8 2.1 Connecting Power ......................8 2.2 Connecting Network ..................... 8 2.3 Connecting Audio ......................8 2.4 Connecting Serial Port ....................

  • Page 4: Introduction

    User Interface  Diagnose and upgrade through dedicated program called VS Manager  System configuration using Internet Explorer High Reliability  Reliable Embedded System  System recovery by dual watch-dog functions User Manual VS-7300 – V1.0 Page 4 of 47 5/2016...

  • Page 5: Product And Accessories

    1. Introduction 1.3 Products and Accessories Part Names and Functions Rear View User Manual VS-7300 – V1.0 Page 5 of 47 5/2016...

  • Page 6: System Connections

    In this configuration, a site can be monitored from many remote central locations. Maximum connections would be limited by network bandwidth connection. Functionally, the VMS (Video Management System) software provided can replace the decoder. User Manual VS-7300 – V1.0 Page 6 of 47 5/2016...
  • Page 7 VMS (Video Management System) is a Windows based remote monitoring program to access multiple encoders for real-time monitoring or control of the encoders and connected cameras. Please refer to the VMS User Manual for more information on VMS. User Manual VS-7300 – V1.0 Page 7 of 47 5/2016...

  • Page 8: Installation

    Please refer to the VS Manager manual for instructions on how to find the IP address of the camera and to make necessary changes. User Manual VS-7300 – V1.0 Page 8 of 47 5/2016...

  • Page 9: System Operation

    Open Internet Explorer and enter the Camera’s IP Address. The system will ask for confirmation to install Active-X Control. Once authorized, Internet Explorer will begin to display video images from the Encoder as shown below: Default IP Address : http://192.168.10.100 User Manual VS-7300 – V1.0 Page 9 of 47 5/2016...
  • Page 10 Input. When the sensor of the camera is working, the sensor light turns red.  Alarm Output Operate the Alarm Device by pressing the number icon. This encoder supports One Alarm Output. A number icon indicates the status of the alarm device. User Manual VS-7300 – V1.0 Page 10 of 47 5/2016...

  • Page 11: Initialization Of Ip Address

    3. Once the system reboots, IP Address will be set to the System Default as below:  IP Mode  IP Address 192.168.10.100 Fixed IP  Subnet Mask 255.255.255.0  Gateway 192.168.10.1  Base Port  HTTP Port 2222 User Manual VS-7300 – V1.0 Page 11 of 47 5/2016...

  • Page 12: Remote Configuration

    The configurations are grouped into 9 categories: Video & Audio, Image, Network, Event, Record, Device, PTZ, System, and User. To save configuration changes, click “Apply”. Leaving the page without clicking “Apply” will discard any new changes. User Manual VS-7300 – V1.0 Page 12 of 47 5/2016...

  • Page 13: System Configuration

    4. Remote Configuration 4.2 System Configuration User Manual VS-7300 – V1.0 Page 13 of 47 5/2016...
  • Page 14 Config Restore is selected. Time  Start Time Camera’s most recent booting date and time.  Current Time Enter the date and time and select Set Current Time to update. User Manual VS-7300 – V1.0 Page 14 of 47 5/2016...
  • Page 15 Factory Reset  Clear all settings including user accounts and logs. Factory Reset except network settings  All the settings except for current network settings are changed to default values. User Manual VS-7300 – V1.0 Page 15 of 47 5/2016...
  • Page 16 4. Remote Configuration 4.3 Video Configuration User Manual VS-7300 – V1.0 Page 16 of 47 5/2016...
  • Page 17  I-Frame Interval Determine I-Frame Interval between 1 and 255.  H.264 Profile Select the H.264 Profile: High Profile or Baseline Profile. A profile defines the various capabilities which target specific applications. User Manual VS-7300 – V1.0 Page 17 of 47 5/2016...
  • Page 18 Erase is for excluding. 3. Select cells by using the right button of the mouse. Multiple cells can be selected by holding and dragging. 4. Select Apply Edited Area to save edits. User Manual VS-7300 – V1.0 Page 18 of 47 5/2016...
  • Page 19 Note: BurnIn OSD Display Size varies according to the encoding resolution setting. This is inevitable because BurnIn OSD is inserted to the frames before encoding is performed. The following table describes the rule for BurnIn OSD display: User Manual VS-7300 – V1.0 Page 19 of 47 5/2016...
  • Page 20 0: No items are displayed. Video area is too small to display OSD in large text. Output Format Output Format menu appears only when Enable Preview is turned on. Select the appropriate monitor output format based on the video output and monitor specification. User Manual VS-7300 – V1.0 Page 20 of 47 5/2016...

  • Page 21: Video Configuration

    Select the Audio Operation Mode: Mode Action No Operation Tx-Only Transmit Only Rx-Only Receive Only Tx & Rx Transmit and Receive  Input Gain Audio Input Gain ranges from 0 to 31. User Manual VS-7300 – V1.0 Page 21 of 47 5/2016...

  • Page 22: Network Configuration

    4. Remote Configuration 4.4 Network IP & Port Configuration User Manual VS-7300 – V1.0 Page 22 of 47 5/2016...
  • Page 23  RTSP Port (554, 1025 - 65535) Enter RTSP port used for RTSP-based connection. The default TRSP port is 554.  RTSP (Real Time Streaming Protocol) is a standard for media streaming between encoder and client. User Manual VS-7300 – V1.0 Page 23 of 47 5/2016...
  • Page 24 SDP file.  File Name: Enter the file name that will be used as the name of the SDP file. When this is entered, it can be accessed through http://ServerAddress/filename User Manual VS-7300 – V1.0 Page 24 of 47 5/2016...
  • Page 25 For Example: a router could send a message if one of its redundant power supplies fails or a printer could send an SNMP trap when it is out of paper. User Manual VS-7300 – V1.0 Page 25 of 47 5/2016...
  • Page 26  Suppression Mode: Encoding bitrate and frame rate are adjusted so frames are not dropped even when the network bandwidths are limited on some devices. In this case, all devices can be affected by the averaged bitrate and frame rate. User Manual VS-7300 – V1.0 Page 26 of 47 5/2016...
  • Page 27 MAC Address: Displays the MAC address of the camera. If the camera is registered to the DDNS server, the MAC address is used for DDNS registration.  Connecting: Device IP Addresses that are currently connected to system are displayed. User Manual VS-7300 – V1.0 Page 27 of 47 5/2016...

  • Page 28: Serial Configuration

    4. Remote Configuration 4.5 Serial Configuration Serial Port Configuration Serial Port Information This camera supports one RS-485 serial port. By default, Pelco-D protocol is used with 2400bps. User Manual VS-7300 – V1.0 Page 28 of 47 5/2016...
  • Page 29  Click desired “Cell” to set schedule.  Click desired “Time Line or Date Line” to set schedule.  To set all cells in the schedule, click below “Empty Cell”. User Manual VS-7300 – V1.0 Page 29 of 47 5/2016...

  • Page 30: Event Configuration

    4. Remote Configuration 4.6 Event Configuration User Manual VS-7300 – V1.0 Page 30 of 47 5/2016...
  • Page 31 Disk removed Disk is detached during operation or damage is found on the file system. If detected while disk is or in abnormal state connected, formatting the disk is recommended. User Manual VS-7300 – V1.0 Page 31 of 47 5/2016...
  • Page 32 Backup to FTP is selected. FTP Base Directory  Specify the name of the directory to be created in the FTP server. This only applies when Use Record is set to Use FTP. User Manual VS-7300 – V1.0 Page 32 of 47 5/2016...
  • Page 33 AVI file is created per event recording. However, it is possible to merge a series of recorded data to a single AVI file depending on pre/post event time settings. The size of the file is limited to 10-200MB or 10 minutes. User Manual VS-7300 – V1.0 Page 33 of 47 5/2016...
  • Page 34 4. Press Root to move back to the page with the date list.  Playback 1. Selecting an AVI file will show a dialog for opening or saving the file. User Manual VS-7300 – V1.0 Page 34 of 47 5/2016...
  • Page 35 AVI files at the same time.  Deletion of Data 1. To delete recorded files, select appropriate files and press Delete button. 2. It is possible to delete multiple files at once. User Manual VS-7300 – V1.0 Page 35 of 47 5/2016...

  • Page 36: User Configuration

    Live Viewing and PTZ Control Guest Live Viewing Only  Add User Press Add button and this window will appear: Enter User ID and password (Up to 15 characters) and select Privilege Level. User Manual VS-7300 – V1.0 Page 36 of 47 5/2016...
  • Page 37 When Skip Login is set to Enable, login step is skipped. The privilege level after login in this way is determined by the setting of Privilege Level After Login Skipped. User Manual VS-7300 – V1.0 Page 37 of 47 5/2016...

  • Page 38: Camera Configuration

    4. Remote Configuration 4.8 Camera Configuration User Manual VS-7300 – V1.0 Page 38 of 47 5/2016...
  • Page 39 Night: Select this option for a brighter image.  AE Mode Auto: AE will adjust brightness values automatically. Manual: AE adjusts brightness values individually - AE Target, AE MAX and AE MIN. User Manual VS-7300 – V1.0 Page 39 of 47 5/2016...
  • Page 40 The Grey Mode works in conjunction with TDN. The grey filter will remove color based on TDN at night and add color based on TDN during the day. On: Color is always removed (gray image). Off: Color is always added (color image). User Manual VS-7300 – V1.0 Page 40 of 47 5/2016...
  • Page 41 Frequency Mode Operation frequency can be selected to avoid a flickering under fluorescent light. The value can be either 50Hz or 60Hz. (127: default, 0: the weakest, 255: the strongest). User Manual VS-7300 – V1.0 Page 41 of 47 5/2016...

  • Page 42: Vs Manager

    Once VS Manager installed, select IP Discovery, create servers. On main page go to Tools, Options and change to this path below. In the address window, after the word "Files" type a space then (x86). User Manual VS-7300 – V1.0 Page 42 of 47 5/2016...

  • Page 43: Data Sheet

     Auto Iris (DC) lens control  Integrated Video Motion Detection  Built-in PoE (Power Over Ethernet: 802af)  SD™ card recording  Two-way Audio Communication (G.711/AAC)  Motion Sensor Input & Alarm Output ______________________________________________________________________ User Manual VS-7300 – V1.0 Page 43 of 47 5/2016...
  • Page 44 6. Data Sheet Specification Sheet User Manual VS-7300 – V1.0 Page 44 of 47 5/2016...

  • Page 45: Appendix

    Relay Type Contact Rating : 1A 30VDC Switching Power : Max 30W 62.5VA Switching Voltage : Max 60VDC  Alarm Signal Output Type NO/NC Contact Signals  Connection to External Device User Manual VS-7300 – V1.0 Page 45 of 47 5/2016...
  • Page 46 Pin No. Pin Name Description RS422 RX- RS422 RX+ RS422 TX- or RS485 TRX- It is selectable by S/W Setup RS422 TX+ or RS485 TRX+ It is selectable by S/W Setup User Manual VS-7300 – V1.0 Page 46 of 47 5/2016...
  • Page 47 Marshall Electronics, Inc. 1910 East Maple Ave. El Segundo, CA 90245 Tel: (800) 800-6608 / (310) 333-0606  Fax (310) 333-0688 www.LCDRacks.com  sales@lcdracks.com User Manual VS-7300 – V1.0 Page 47 of 47 5/2016...

Table of Contents