Operating Instructions - Marshall Electronics CV610-U3 User Manual

Operating Instructions

Before operating the unit, please read this manual thoroughly and retain it for future reference.
Thank you for purchasing our product. If there are any questions, please contact the authorized dealer.
IMPORTANT INFORMATION
Legal Notice
Attention:
To ensure account security, please change the password after your first login. You are recommended to set a
strong password (no less than eight characters).
The contents of this document are subject to change without prior notice. Updates will be added to the new version
of this manual. We will readily improve or update the products or procedures described in the manual.
Best effort has been made to verify the integrity and correctness of the contents in this document, but no statement,
information, or recommendation in this manual shall constitute formal guarantee of any kind, expressed or implied.
We shall not be held responsible for any technical or typographical errors in this manual.
The product appearance shown in this manual is for reference only and may be different from the actual
appearance of your device.
This manual is a guide for multiple product models and so it is not intended for any specific product.
Due to uncertainties such as physical environment, discrepancy may exist between the actual values and reference
values provided in this manual.
Use of this document and the subsequent results shall be entirely on the user's own responsibility.
Safety Information
WARNING!
Installation and removal of the unit and its accessories must be carried out by qualified personnel. You must read
all of the Safety Instructions supplied with your equipment before installation and operation.
Warnings:
 If the product does not work properly, please contact your dealer. Never attempt to disassemble the camera
yourself. (We will not assume any responsibility for problems caused by unauthorized repair or
maintenance.)
 This installation should be made by a qualified service person and should conform to all the local codes.
 When shipping, the camera should be packed in its original packaging.
 Make sure the power supply voltage is correct before using the camera.
 Do not drop the camera or subject it to physical shock.
 Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit of ethanol and
wipe it gently. If the camera will not be used for an extended period of time, put on the lens cap to protect
the sensor from dirt.
 Do not aim the camera lens at the strong light such as sun or incandescent lamp. The strong light can cause
fatal damage to the camera.
Maintenance Precautions:
 If there is dust on the front glass surface, remove the dust gently using an oil-free brush or a rubber dust
blowing ball.
 If there is grease or a dust stain on the front glass surface, clean the glass surface gently from the center
outward using anti-static gloves or an oil-free cloth. If the grease or the stain still cannot be removed, use
anti-static gloves or an oil-free cloth dipped with detergent and clean the glass surface gently until it is
removed.
 Do not use organic solvents, such as benzene or ethanol when cleaning the front glass surface.
3