Configuring Visual Alerts; Setting The Audio Path; Setting Dialing Options - Avaya 9601 Using Manual

Avaya Menu
4. Press Save.

Configuring visual alerts

About this task
Use this task to cause the LED in the top right corner of the phone to flash when the deskphone
gets incoming calls.
Procedure
1. Press Avaya Menu.
2. Press Select to select Options & Settings > Call Settings > Visual Alerting.
3. Press Change to select On or Off.
4. Press Save.

Setting the audio path

You can set your phone to go off-hook on the Speaker or the Headset when you make an on-hook
call.
Procedure
1. Press Avaya Menu.
2. Press Select to select Options & Setting > Call Settings > Audio Path.
3. Press Change to select Headset or Speaker.
4. Press Save.

Setting dialing options

About this task
Your phone has the following two dialing options:
• You can dial a number by picking up the handset, getting a dial tone, and dialing the required
number (off-hook dialing).
• You can use the edit dialing feature. If you set this feature, you can enter all or part of the
number, use backspace to correct a digit if needed, and when ready, initiate the dialing process
using a softkey. Edit dialing may not be available to you, depending on how your system is
administered.
If you activated the Limit Number of Concurrent Calls (LNCC) feature in the edit dialing mode, and
you start dialing a number when at the same time your deskphone receives a call, the deskphone
presents this call to you instead of logging the call.
Using Avaya 9601 IP Deskphone SIP
18
Comments? infodev@avaya.com
June 2014