Starting Your Appliance - Pelpro PP60 Owner's Manual

Using Your Appliance
Starting your appliance the first time
What to Expect
Combustion blower will turn on
1
Igniter will turn on
2
Pellets will drop, smoke may occur in firebox but will
3
evacuate, and flame will appear in fire pot.
Convection blower will automatically turn on after the
4
appliance heats up. Convection blower will continue
to run even after your appliance has been shut
down.
Pro Tips
• Odors and vapors are released during initial startup after purchase; burning your appliance
on HI for 30 minutes will allow the paint to cure. Open windows or doors for air circulation
until burn off is complete.
• During start up and normal operation your appliance's front door must be closed
• Priming is only required the first time your appliance is lit, or after a FUEL FEED ALARM.
Fire Risk
Keep combustible materials, gasoline and other flammable vapors and liquids clear of appliance.
•
•
•
•
Keep all such liquids well away from the appliance while it is in use as combustible materials may ignite.
HOT SURFACES!
Hot glass will cause burns.
• Do not touch glass until it is cooled
• NEVER allow children to touch glass
• Keep children away
• CAREFULLY SUPERVISE children in same room as fireplace
• Alert children and adults to hazards of high temperatures
• High temperatures may ignite clothing or other flammable materials
• Keep clothing, furniture, draperies and other flammable materials away
14
WARNING!
Do NOT operate appliance with door open
Do NOT operate appliance with fire pot floor open
Do NOT store flammable materials in the appliance's vicinity
Do NOT use gasoline, lantern fuel, kerosene, charcoal lighter fluid or similar liquids or gels to start or
"freshen up" a fire in this appliance
WARNING!
Glass and other surfaces are hot during operation AND cool down.
PelPro Cast Pellet Stove • 7083-171N • 9/8/17
4
1
3
2
pelprostoves.com