Oricom 870 User Manual page 9

➑ Press the power button to switch on your Parent unit. The Parent and Baby unit
will link automatically and the Baby unit's link light will turn solid green.
The first time you switch on your Parent unit, a set-up wizard asks you to set the
time and then shows you all your baby monitor's features.
If you want, you can skip through the set-up wizard by tapping the screen or
tapping Exit, when shown.
When you exit the set-up wizard, the Parent unit will show you the live view from
the Baby unit and you're all set up!
Vol.
Power Mute
Need some help? Call 1300 889 785 or go to www.oricom.com.au
T T Talk
Tip
If you ever want to watch the
set-up wizard again, tap Menu
and then Oricom Help, then
Introduction.
Getting set up 9