Table of Contents
Advertisement
Quick Links
Contact Details for Oricom support and Warranty claims in Australia
Oricom International Pty Ltd
Unit 1, 4 Sovereign Place
South Windsor, NSW 2756
Australia
Email: support@oricom.com.au
Phone: 1300 889 785 or (02) 4574 8888
(Monday to Friday 8am to 6pm AEST)
Web: www.oricom.com.au
Fax: (02) 4574 8898
Contact details for Oricom Support and Warranty Claims in New Zealand
Email: support@oricom.co.nz
Phone: 0800 674 266
(Monday to Friday 10am to 8pm NZST)
Web: www.oricom.co.nz
Ref: 29112013
Advertisement
Table of Contents
Related Manuals for Oricom Babysense 2
Summary of Contents for Oricom Babysense 2
- Page 1 Phone: 1300 889 785 or (02) 4574 8888 (Monday to Friday 8am to 6pm AEST) Web: www.oricom.com.au Fax: (02) 4574 8898 Contact details for Oricom Support and Warranty Claims in New Zealand Email: support@oricom.co.nz Phone: 0800 674 266 (Monday to Friday 10am to 8pm NZST) Web: www.oricom.co.nz...
- Page 2 User Guide Babysense2 is included as a medical device on the Australian Register of Therapeutic Goods (ARTG No. 97479) Babysense2 is intended for use as an Infant Apnoea Alarm. ALWAYS READ THE LABEL AND USER GUIDE, USE ONLY AS DIRECTED. Please retain your purchase receipt and attach to the back page of this user guide.
-
Page 3: Table Of Contents
Troubleshooting Guide ............14 Customer Support ...............15 Express Warranty ..............16 Need Help? If you need assistance setting up or using your Oricom Babysense2 now or in the future, call Oricom Product Support. Australia 1300 889 785 or (02) 4574 8888 www.oricom.com.au Mon-Fri 8am –... -
Page 4: Important Use And Safety Warning
Important Use And Safety Warning IMPORTANT USE AND SAFETY WARNING It is essential that all users of your Babysense2 monitor read and understand this user guide thoroughly before installing or using the product. This user guide contains detailed information on installation and operation of the Babysense2 monitor which all users need to be aware of to ensure that the monitor operates properly. - Page 5 Important Use And Safety Warning • To avoid possible danger from sensor cords, ensure that excess cords are secured under the mattress with the included cable ties and are not visible or within reach of baby or other infants. • Do not place the cords in a high "wear and tear" location. •...
-
Page 6: General Information
• One control unit holder • One hanging hook • Two sensor pads • Two reuseable plastic cable ties Requires 4 AA size, 1.5 volt high quality Alkaline batteries (not supplied). If any items are missing from the pack please call Oricom Customer Support. -
Page 7: Technical Specifications
General Information Technical Specifications • Powered by 4 size AA, 1.5 volt high quality Alkaline batteries (not supplied). Power consumption approx. 1mA. • Battery life approx. 6 months using high quality alkaline batteries. • Alarm volume typically 85dB SPL at distance of one metre from control unit. •... -
Page 8: Installation
Installation Installation 1. Remove battery cover by inserting a flat screw driver into the opening recess and insert, in accordance with the markings, 4 new and identical size AA 1.5 volt high quality Alkaline batteries, close cover. Note: Please dispose of used batteries in accordance with local waste regulations. - Page 9 Installation 4. Sensor pad installation: • When using for infant not yet able to crawl, place one sensor pad as shown in illustration 3. Make sure the sensor is placed underneath baby’s location in cot. • When baby begins to crawl, and is able to move onto areas not "covered"...
- Page 10 Installation 6. Attach end(s) of the cord(s) to the outlets marked "SENSOR" on the back of control unit (as shown in illustration 5 and 6). When using one sensor pad, attach to any “SENSOR” outlet. When using with a slat based cot, ensure the sensor pads are stable and supported adequately to enable full contact of the sensor pads with the mattress.
- Page 11 Installation 7. Should the design of the cot not allow proper installation with the control unit holder, please use the supplied hanging hook (as shown in illustration 6). Hang the control unit from the bottom edge of the cot or affix the hook with a screw (not supplied) to the bottom edge of the cot and hang the control unit from the bottom edge of the cot.
- Page 12 Installation 9. Place mattress firmly on top of sensor pads. When using with a slatted base cot, ensure the sensor pads are stable & supported adequately. If the mattress cannot be in direct contact with the sensor pads, or if the cot base is soft or padded, place plywood (not supplied) on the cot base, place the sensor pads on the plywood and place the mattress firmly on top to enable full contact of the sensor pads with the...
-
Page 13: Operation
Operation Operation Babysense2 is ready for operation and use once the installation is complete. To operate, follow the instructions below: • Place your baby in cot. • Turn control unit on by pressing On/Off button. • Red control lights switch on briefly and a double click sound is heard. •... - Page 14 Operation IMPORTANT: You should not rely on Babysense2 in any location throughout the home or place of care where the alarm cannot be heard. Babysense2 is an exceedingly sensitive device which monitors baby's breathing movement through the mattress during sleep. There are two main causes of malfunction.
- Page 15 It has been noted that false alarms resulting from slow breathing movement rate occur with one in about 200 babies. Please contact Oricom Customer Support team with any product related questions. Please note Babysense2 monitors and alerts with respect to breathing movement rates, but cannot prevent cessation of breathing.
- Page 16 Operation Caring for your Babysense2 Warning Babysense2 is a high quality, high sensitivity electronic device which must be handled with care: • Do not handle roughly, drop or throw. • Follow the installation instructions carefully to ensure that it is installed securely and correctly.
-
Page 17: Troubleshooting Guide
ATTENTION: Should false alarms sound as a result of reduced sensitivity, increase the level of sensitivity and then perform the Performance Test. For all product related questions and warranty support please call Oricom Customer Support team on 1300 889 785. -
Page 18: Customer Support
If you have any problems setting up or using this product you will find useful tips and information in the Troubleshooting section of this user guide as well as “Frequently Asked Questions” on our website www.oricom.com.au. If you have further questions about using the product after reviewing the resources above or would like to purchase replacement parts or accessories please call our Customer Support Team. -
Page 19: Express Warranty
Express Warranty (Australia) Express Warranty (Australia) Oricom International Pty Ltd is the distributor of Babysense2 in Australia. This Express Warranty is provided by Oricom International Pty Ltd ABN 46 086 116 369, Unit 1, 4 Sovereign Place, South Windsor NSW 2756, herein after referred to as “Oricom”. -
Page 20: Australia
No change to the conditions of this Express Warranty is valid unless it is made in writing and signed by an authorised representative of Oricom. Oricom will not be liable under this Express Warranty, and to the extent permitted by law will not be liable for any defect, loss, damage or injury arising out of or in connection with a: 1. -
Page 21: Australia
Express Warranty (Australia) does not qualify for return, this warranty does not apply to your product. Products that are authorised to be returned to Oricom in Australia must include all of the following: • A completed Return Authorisation form • A copy of your Proof of Purchase (please keep your original copy) •...
Need help?
Do you have a question about the Babysense 2 and is the answer not in the manual?
Questions and answers