Oricom 870 User Manual page 8

8 8 Getting set up
Important note about connec-
tions
If the Parent and Baby unit lose
the link or connection between
them, the link light will flash and
the screen will say the link is lost,
and is trying to reconnect. If after
30 seconds there's still no link,
you'll hear an alert tone from the
Parent unit. First, check on your
baby and then follow the steps
from step 7 again to set up the
link again.
➏ Using your power adaptor cable, plug one end into the power plug on the Baby
unit (Camera) and plug the power plug into the power socket and switch the
power on.
➐ Press and hold the power button for a two - three seconds. The link light will
flash green and the night light will light on and off.
Need some help? Call 1300 889 785 or go to www.oricom.com.au