Back to Contents Page
Coin-Cell Battery
Dell™ Latitude™ E4200 Service Manual
Removing the Coin-Cell Battery
Replacing the Coin-Cell Battery
Removing the Coin-Cell Battery
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
1. Follow the procedures in
Before Working on Your
2. Remove the LED cover (see
3. Remove the keyboard (see
4. Pry up the coin-cell battery to release the double-sided adhesive tape on the bottom.
5. Lift the coin-cell battery out of the computer.
6. Disconnect the battery cable from the system board.
1
battery cable
3
coin-cell battery
Replacing the Coin-Cell Battery
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
1. Connect the coin-cell battery cable to the system board.
2. Insert the coin-cell battery into the computer.
3. If you are re-installing the old coin-cell battery, press down to seal the tape on the bottom.
If you are installing a new coin-cell battery, remove the adhesive backing from the battery and slide the battery under the tab. Press to seal the tape on
the bottom.
Computer.
Removing the LED
Cover).
Removing the
Keyboard).
2
LED board cable