Removing The Card With Bluetooth Wireless Technology; Replacing The Card With Bluetooth Wireless Technology - Dell Latitude E4200 Service Manual

Back to Contents Page
Card With Bluetooth
Dell™ Latitude™ E4200 Service Manual
Removing the Card With Bluetooth Wireless Technology
Replacing the Card With Bluetooth Wireless Technology
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
Removing the Card With Bluetooth Wireless Technology
1. Follow the procedures in Before Working on Your
2. Remove the LED cover (see
3. Remove the keyboard (see
4. Disconnect the cable from the system board by gently pulling up on the release latch.
5. Lift up on the module to remove it from the base assembly.
6. Turn the module upside down.
7. Remove the M2 x 3-mm screw from the card.
8. Pull up on the card to disconnect it from the connector on the module.
1 release latch
3 base assembly
5 card
7 screw
Replacing the Card With Bluetooth Wireless Technology
1. Connect the card to the card connector on the module.
2. Replace the M2 x 3-mm screw on the card.
3. Turn the module topside up, and press the module into the base assembly.
4. Connect the cable to the system board using the release latch.
5. Replace the keyboard (see
®
Wireless Technology
Computer.
Removing the LED Cover).
Removing the Keyboard).
2 cable
4 module
6 card connector
Replacing the Keyboard).