Removing The Display Panel - Dell Latitude E4200 Service Manual

NOTICE: To avoid permanent damage to the display panel, do not press or rub on the center of the panel.
NOTICE: When replacing the display bezel, press only on the outer edges when snapping the bezel into place. Pressing on the inner edges could
cause the display panel to crack.
1. Align the bezel edges with those on the display assembly, and gently snap the bezel into place around the entire perimeter of the assembly.
1 display bezel 2 display assembly
2. Replace the display assembly (see
3. Replace the keyboard (see
4. Replace the LED cover (see
5. Replace the service panel (see
6. Follow the procedures in After Working on Your
Removing the Display Panel
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
CAUTION: The tabs on the outer edges of the display panel are made of very thin metal, and could cut the skin if not handled with care.
1. Follow the instructions in Before Working on Your
2. Remove the service panel (see
3. Remove the LED cover (see
4. Remove the keyboard (see
5. Remove the display assembly (see
6. Remove the display bezel (see
NOTICE: To avoid permanent damage to the display panel, do not press or rub on the center of the panel.
7. Remove the four M2 x 3-mm screws from the display panel.
NOTICE: To avoid permanent damage to the display panel, lift the panel using both hands on the sides of the panel.
Replacing the Display Assembly).
Replacing the Keyboard).
Replacing the LED Cover).
Replacing the Service Panel).
Computer.
Computer.
Removing the Service Panel).
Removing the LED Cover).
Removing the Keyboard).
Removing the Display Assembly).
Removing the Display Bezel).