Dell Latitude E4200 Service Manual page 44

Connect the Latitude ON card cables to the connectors on the front left side of the board, connecting the gray cable to the connector marked with a "G"
and the black cable to the connector marked with a "B".
NOTE: It is important to reconnect all of the cables to their correct posts when replacing related components.
1 black WLAN antenna (from LCD)
3 black WLAN relay cable
5 grey WLAN antenna holder
7 white WLAN antenna cable (from
LCD)
9 grey and white WWAN antenna
(from LCD)
11 grey cable (from Latitude ON
card)
NOTE: Grey WLAN antenna holder is used as a holder if the WLAN card does not have a grey antenna post.
NOTE: The white WLAN anteena can be routed over or under the RSB.
5. Replace the WLAN/WiMax card (see
6. Replace the service panel (see
7. Follow the procedures in After Working on Your
Back to Contents Page
2 grey WLAN antenna (from LCD
4 grey WLAN relay cable
6 black WLAN antenna post
8 power cable (from system board)
10 black and grey WWAN antenna
(from LCD)
12 black cable (from Latitude ON
card)
Replacing the WLAN/WiMax Card).
Replacing the Service Panel).
Computer.