Specifications - Evinrude E25RSES Operator's Manual

Product Information
Displacement
Engine Type
Full Throttle Operating
Range
(1)
Power
Idle RPM in Neutral
(2)
Ignition Timing
Emission Control System:
(2)
per SAE J1930
Fuel Requirements
Oil – Lubricant
– Capacity
Warning Signals
(3)
Battery, Minimum
(2)
Spark Plug
Fuses
Fuel Filter
Battery Charging
Gearcase – Lubricant
– Capacity
Power Trim/Tilt – Fluid
Capacity
Propeller
Weight
Sound at Drivers Ear
(LpA) ICOMIA 39.94
Transom Height
(1) Rated following the standards of ICOMIA 28.83, ISO 3046 and NMMA.
(2) Emission Control Information.
(3) Use a 800 CCA (1000 MCA) battery when operating in temperatures below 32°F (0°C).
(4) Use Evinrude/Johnson HPF Pro Gearcase Lubricant for high performance outboards and commercial
applications. Evinrude/Johnson HPF Pro Gearcase Lubricant delivers exceptional durability and reliability
and promotes long gearcase life in marine use.
64

SPECIFICATIONS

25, 30 Models
35.1 cu. in. (576 cc)
In-line, 2 Cylinder, Two-Cycle, E-TEC
25 HP – 5000 to 6000 RPM
30 HP – 5000 to 6000 RPM
25 HP – 25 HP (18.4 kw) @ 5500 RPM
30 HP – 30 HP (22.1 kw) @ 5500 RPM
(2)
700 ± 50
Not Adjustable
ECM, E-TEC (Engine Control Module, E-TEC)
(2)
87 Pump Posted AKI (90 RON)
– Refer to Fuel Requirements on page 18
TC-W3 NMMA-certified oil or Evinrude/Johnson XD100 oil
– Refer to Oil Requirements on page 16
1.5 qt. (1.4 l)
Controlled by the outboard's EMM
640 CCA (800 MCA) 12 volt or
800 CCA (1000 MCA) 12 volt below 32°F (0°C)
Refer to ECI Label
Refer to Fuse on page 48
In-line Replaceable
15-Amp, Fully Regulated
(4)
Evinrude HPF XR
11 fl. oz. (325 ml)
11.7 fl. oz. (345 ml)
Refer to Propeller Selection on page 61
DR / RL Models 142 /148 lbs. (64 / 67 Kg)
DTE / DTEL Models 148 / 154 lbs. (67 / 70 Kg)
EL / PL Models 169 / 178 lbs. (77 / 81 Kg)
76.8 dB(A)
R / TE Models 14 1/2 to 15 in (368 to 381 mm)
RL / TEL / DPL Models 19 1/2 to 20 in (495 to 508 mm)