Table of Contents
Advertisement
Back to Contents Page
Module Cover
Dell™ Inspiron™ 1318 Service Manual
Removing the Module Cover
Replacing the Module Cover
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions shipped with your computer.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
Removing the Module Cover
1. Follow the procedures in
Before You
2. Remove the M2.5 x 5-mm screw and loosen the three captive screws on the cover labeled "M".
3. Using a flat-blade screwdriver, carefully pry open the module cover.
1
M2.5 x 5-mm screw
3
captive screws (3)
4. Lift the module cover away from the computer.
Replacing the Module Cover
1. Replace the module cover and tighten the three captive screws.
2. Replace the M2.5 x 5-mm screw.
3. Slide the battery into the battery bay, until it clicks into place.
Back to Contents Page
Begin.
2
module cover
Advertisement
Table of Contents
