Table of Contents
Advertisement
Back to Contents Page
Charger Board
Dell™ Inspiron™ 1318 Service Manual
Removing the Charger Board
Replacing the Charger Board
CAUTION:
Before performing the following procedures, follow the safety instructions shipped with your computer.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of
the computer.
Removing the Charger Board
1. Follow the procedures in
Before You
2. Remove the system board (see
3. Remove the screw that secures the charger board to the base of the computer.
1
M2 x 3-mm screw
4. Lift the charger board away from the base of the computer.
Replacing the Charger Board
1. Align the screw hole on the charger board with the screw hole on the base of the computer.
2. Replace the screw that secures the charger board to the base of the computer.
3. Replace the system board (see
4. Slide the battery into the battery bay, until it clicks into place.
Back to Contents Page
Begin.
System
Board).
2
charger board
System
Board).
Advertisement
Table of Contents
