Module Cover; Removing The Module Cover - Dell Inspiron 14z N411z Owner's Manual

Module Cover

WARNING:
Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).

Removing the Module Cover

1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the battery. See "Removing the Battery" on page 13.
3 Loosen the captive screw that secures the module cover to the computer
base.
4 Use your fingertips to release the tabs on the module cover from the slots
on the computer base.
5 Lift the module cover off the computer base.
3
Module Cover
15