Removing The Module Cover; Replacing The Module Cover - Dell Inspiron 1440 Service Manual

Back to Contents Page
Module Cover
Dell™ Inspiron™ 1440 Service Manual
Removing the Module Cover
Replacing the Module Cover
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
surface (such as the back panel) on the computer.
CAUTION:
is not covered by your warranty.
CAUTION:
computer.
Removing the Module Cover
1. Follow the procedures in
2. Remove the battery (see
3. Remove the screw that secures the module cover to the computer base.
4. Lift the module cover off the computer at an angle as shown in the figure.
1 module cover tabs (4)
3 screw
Replacing the Module Cover
1. Align the tabs on the module cover with the slots on the computer base and gently snap it into place.
2. Replace the screw that secures the module cover to the computer base.
3. Replace the battery (see
Back to Contents Page
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
2 module cover
Replacing the Battery).
UserManuals.info
Removing the Battery) before working inside the