Removing The Charger Board - Dell XPS M1530 Service Manual

Back to Contents Page
Charger Board
Dell™ XPS™ M1530 Service Manual
Removing the Charger Board
Replacing the Charger Board
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the
computer.
Removing the Charger Board
1. Follow the procedures in Before You
2. Remove the system board (see
3. Remove the two screws that secure the charger board to the system board.
1 screw (2)
3 USB connector (2)
5 VGA connector
7 system board
9 IEEE 1394a connector
4. Turn the system board over and detach the charger board from the system board connector.
1 charger board (view from below)
Begin.
Removing the System Board).
2 AC adapter connector
4 charger board
6 network connector (RJ-45)
8 HDMI connector
2 system board connector