Removing The Charger Board - Dell 1525 - Inspiron - Pentium Dual Core 1.86 GHz Service Manual

Charger Board

Removing the Charger Board

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1. Follow the instructions in Before You
2. Remove all memory module (see
3. Remove the hard drive (see
4. Remove the optical drive (see
5. Remove all Mini-Cards (see
6. Remove the center control cover (see
7. Remove the keyboard (see
8. Remove the display assembly (see
9. Remove the internal card with Bluetooth wireless technology, if installed (see
10. Remove the palm rest (see
11. Remove the ExpressCard cage (see
12. Remove the processor thermal-cooling assembly (see
13. Remove the processor (see
14. Remove the system board (see
15. Remove the two screws securing the charger board to the system board assembly.
16. Carefully disconnect the charger board connector from the system board and seperate charger board from the system board assembly.
1 screws (2) 2 charger board connector
3 charger board 4 system board
Begin.
Removing Memory Module).
Removing the Hard Drive).
Removing the Optical Drive).
Removing Mini-Card).
Removing the Center Control
Removing the Keyboard).
Removing the Display Assembly).
Removing the Palm Rest).
Removing the ExpressCard
Removing the Processor Thermal-Cooling
Removing the Processor Module).
Removing the System Board Assembly).
Cover).
Removing the Internal Card With Bluetooth® Wireless
Cage).
Assembly).
Technology).