Sartorius PMA 7501-000G Installation Instructions Manual page 6

6
Connection to AC Power
The equipment is powered through the AC adapter
supplied
§ Insert the right-angle plug into the IEC jack (13) on
the scale
§ Plug the AC adapter into an electrical AC power outlet
! Observe the safety instructions and warnings in this
manual
The equipment is powered through the AC adapter
supplied. Check that the voltage rating of the AC
adapter matches that of your local line voltage (mains
supply). If it does not match your local voltage rating
or if the plug design differs from your local standard,
contact your Sartorius office or dealer. Use only gen-
uine Sartorius AC adapters! The use of AC adapters
from other manufacturers, even if these units have a
registered approval rating from a national testing lab-
oratory, requires the approval of a certified technician.
Connecting the Data Cable
§ The series PMA.Net are equipped with an Ethernet
interface (12) and can either be directly connected to
the network interface of a PC, or via a
10BaseT/100BaseTX LAN.
§ Connect the Ethernet cable
§ The series PMA.World are equipped with a (D-Sub
plug, 9-contact) interface (12).
§ Connect the data cable and tighten the screws.