Table of Contents
Advertisement
screw holes and the cable hole in the ceiling
according to the drill template.
4. Route the cables through the cable hole.
5. Secure the mounting base to the ceiling with the
supplied screws. (You can drill the expansion screws
first or drill the fixing screws directly)
Figure 2-8 Fix the Mounting Base to the Ceiling
6. Route the cables. Connect the power cord and
network cable.
7. Secure the camera to the mounting base.
8. Adjust the camera according to Figure 2-10 to get an
optimum angle.
1). Hold the camera body and rotate the enclosure
to adjust the pan angle [0° to 360°].
2). Move the camera body up and down to adjust
the tilt angle [0° to 75°].
3). Rotate the camera body to adjust the Loosen
No.3 adjusting azimuth angle [0° to 360°].
Tilt Position Range
[0°-75°]
2.2.2 Ceiling Mounting with Gang Box
You need to purchase a gang box separately if you adopt celling
mounting with gang box.
Figure 2-7 Drill Template
Expansion Screw
Fixing Screw
Figure 2-9 Secure the Camera
Pan Position Range
[0°-360°]
Figure 2-10 3-axis Adjustment
Rotation Position Range
[0°-360°]
Advertisement
Table of Contents
