Beko WTE7604XLW0 Owner's Manual page 52

Troubleshooting
Detergent residue left on
the laundry.
Clothes get tangled up too
much in the drum when
washing.
Load is wrinkled.
Washer does work. Nothing
is displayed on the screen.
Water Cut off symbol on LCD
is light up
52 / English
Excessive laundry might have been
loaded in.
Wrong program cycle and
temperature might have been
selected.
Using insufficient amount of
detergent.
Using powder or granular detergents
in cold water washing may leave
residue on wash load.
Using wrong type of detergent.
Excessive laundry might have been
loaded in.
Washing many items of the same
type or size of clothes together.
Delay in unloading the washer.
Wrong program cycle might have
been selected.
Excessive laundry might have been
loaded in.
The plug might not be plugged in the
mains outlet.
Fuse may have blown.
Power may be cut off.
The "On/Off" button might not have
been pressed.
Water may have been cut off.
Do not load the washer in excess.
Select the proper program cycle
and temperature for the laundry to
be washed (See "Laundry Tips" &
"Program Cycle Selection").
Use the recommended amount of
HE detergent appropriate for water
hardness and soil level of laundry.
Try to use a liquid detergent when
washing in cold water.
Use liquid detergent for cold wash
cycle for good wash results. Use proper
detergents recommended for wools,
handwashable and delicate items.
Do not load the washer in excess.
Load the wash drum with items of
different sizes.
Unload the washer as soon as the wash
cycle ends.
Select the proper program cycle for the
laundry to be washed (See "Laundry
Tips" & "Program Cycle Selection").
Do not load the washer in excess.
Check the plug.
Check the fuse / circuit breaker.
Check the supply power.
Press this button.
You can restart your machine by pressing
the "Start/Pause/Cancel" button for a
short time after ensuring that the water is
not cut off.
Front-Loading Automatic Washer