Removing Shipping Bolts; Levelling The Washer - Beko WTE7604XLW0 Owner's Manual

Installation Instructions

Removing shipping bolts

B
WARNING
¾ Shipping bolts must be removed before operating the washer! Otherwise, the
appliance will be damaged seriously!
1. Loosen all the bolts with a spanner until they rotate freely ("C")
2. Remove the shipping bolts by turning them gently.
3. Bolt hole covers (supplied in the bag with the owner's guide) are fitted into the holes on the rear
panel with a special lock mechanism. To fit the cover, first insert it into the hole and then rotate it
counterclockwise with a screwdriver until it is locked. To unlock, apply the procedure in reverse.
CAUTION
C
¾ Keep the shipping bolts in a safe place to reuse when the clothes washer
needs to be moved again in the future.
¾ Never move the appliance without shipping bolts properly fixed in place!

Levelling the washer

B
WARNING
¾ Do not use any tools to loosen the lock nuts. Otherwise, they can be
damaged.
1. Manually (by hand) loosen the lock nuts on the feet.
2. Adjust them until the washer stands level and firmly.
3. Important: Tighten all lock nuts up again.
12 / English Front-Loading Automatic Washer