Cleaning The Drain Pump Filter - Beko WTE7604XLW0 Owner's Manual

User maintenance instructions

Cleaning the drain pump filter

Filter system in your washer prevents solid items such as buttons, coins and fabric fibers clogging the
pump impeller during discharging of the washing water. Thus, a good water discharge is achieved and
the pump life is extended.
• If your washer fails to drain the water, the pump filter may be clogged. You may have to clean it
occasionally to prevent any clogging. Water must be drained completely to clean the pump filter.
In addition, water may have to be drained off completely in the following cases:
• before transporting the appliance (e.g. when moving )
• when there is a danger of frost
In order to clean the dirty filter and discharge the water;
1- Disconnect or unplug the washer from the power supply.
WARNING
A
¾ There may be water at 158F (70°C) in the drum. Therefore, the filter must
be cleaned only after the inside water is cooled down to avoid hazard of
scalding.
2- Open the filter cap. The filter cap may be composed of one or two pieces according to the model of
your washer.
If it is composed of two pieces, press the tab on the filter cap downwards and pull the piece out
towards yourself.
3- An emergency drain hose is supplied with your washer.
Owner's Guide & Installation Instructions 41 / English