Procedure For Tilting Down (Power Trim And Tilt Models) - Yamaha F350 Owner's Manual

2. Press the power trim and tilt switch "
outboard motor has tilted up completely.
UP
UP
UP
3. Set the tilt support lever to support the engine.
WARNING! After tilting the outboard motor, be sure
to support it with the tilt support knob or tilt sup-
port lever. Otherwise the outboard motor could fall
back down suddenly if oil in the power trim and tilt
N
ZMU05829
" (up) until the
UP
ZMU08585
UP
ZMU05838
UP
ZMU06020
UP
ZMU05839
unit or in the power tilt unit loses pressure.
NOTICE: Do not use the tilt support lever or knob
when trailering the boat. The outboard motor could
shake loose from the tilt support and fall. If the mo-
tor cannot be trailered in the normal running posi-
tion, use an additional support device to secure it in
the tilt position. For more detailed information, see
page 61.
[ECM01642]
4. Once the outboard motor is supported with the tilt sup-
port lever, press the power trim and tilt switch "
(down) to retract the trim rods. NOTICE: Make sure
that the trim rods retracts completely during moor-
ing. This protects the rods from marine growth and
corrosion, which could damage the power trim and
tilt mechanism.
[ECM00253]
EMU35517
Procedure for tilting down (power trim and tilt
models)
1. Push the power trim and tilt switch "
outboard motor is supported by the tilt rod and the tilt
support lever becomes free.
2. Release the tilt support lever.
3. Push the power trim and tilt switch "
the outboard motor to the desired position.
Operation
[EWM00263]
ZMU05824
"
" (up) until the
ZMU05856
" (down) to lower
58