Table of Contents
Advertisement
4.
Models equipped with trim rods: Once the
outboard motor is supported with the tilt
support lever, press the power trim and
tilt switch "
" (down) to retract the trim
rods. NOTICE: Be sure to retract the
trim rods completely during mooring.
This protects the rods from marine
growth and corrosion which could
damage the power trim and tilt mecha-
nism.
[ECM00251]
EMU33120
Procedure for tilting down (power trim
and tilt models)
1.
Push the power trim and tilt switch "
(up) until the outboard motor is supported
by the tilt rod and the tilt support lever be-
comes free.
2.
Release the tilt support lever.
3.
Push the power trim and tilt switch "
ZMU03452
(down) to lower the outboard motor to the
desired position.
Operation
ZMU01884
"
ZMU06018
"
61
Advertisement
Table of Contents
