Procedure For Tilting Down (Power Trim And Tilt Models) - Yamaha FL250A Owner's Manual

Operation
could shake loose from the tilt support
and fall. If the motor cannot be trail-
ered in the normal running position,
use an additional support device to
secure it in the tilt position. For more
detailed information, see page 58.
[ECM01641]
4. Once the outboard motor is supported
with the tilt support lever, press the power
trim and tilt switch "
the trim rods. NOTICE: Make sure that
the trim rods retracts completely dur-
ing mooring. This protects the rods
from marine growth and corrosion,
which could damage the power trim
and tilt mechanism.
55
" (down) to retract
[ECM00252]
F200C, FL200C, F225B, FL225B, F250A,
FL250A
F225C
EMU42700
Procedure for tilting down (power trim
and tilt models)
1. Push the power trim and tilt switch "
(up) until the outboard motor is supported
by the tilt rod and the tilt support lever be-
comes free.
2. Release the tilt support lever.
F200C, FL200C, F225B, FL225B, F250A,
FL250A
ZMU07399
ZMU07397
"
ZMU07546