Procedure For Tilting Down (Power Trim And Tilt Models); Cruising In Shallow Water; Power Trim And Tilt Models - Yamaha F350A Owner's Manual

Operation
and tilt switch "
trim rods.
ECM00250
CAUTION:
Be sure to retract the trim rods complete-
ly during mooring. This protects the rods
from marine growth and corrosion which
could damage the power trim and tilt
mechanism.
EMU35511
Procedure for tilting down (power
trim and tilt models)
1. The main key switch must be "
for the power trim and tilt switch on the
digital electronic control to operate.
2. Push the power trim and tilt switch "
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support lever
becomes free.
3. Release the tilt support lever.
4. Push the power trim and tilt switch "
(down) to lower the outboard motor to
the desired position.
45
" (down) to retract the
" (on)
ZMU05856
DN
"
DN
"
EMU28060

Cruising in shallow water

The outboard motor can be tilted up partially
to allow operation in shallow water.
EMU32870

Power trim and tilt models

The outboard motor can be tilted up partially
to allow operation in shallow water.
EWM00660
WARNING
Place the gear shift in neutral before
G
ZMU05840
ZMU05841
DN
DN
ZMU05842